• Safety and microbial dynamics of high-moisture extruded protein systems under chilled storage 

  NЕTRЕBА, Nаtаliа; SANDU, Iuliana; BULGARU, Viorica (Technical University of Moldova, 2025)

  Growing consumer demand for environmentally sustainable protein alternatives has intensified research into the safety and quality of plant-based meat alternatives. This study evaluates the microbiological stability of ...
• Microbial Β-Glucans: Extraction methods and structural characteristics – a review 

  CHIRSANOVA, Aurica; BOIŞTEAN, Alina; CHIORU, Ana (Technical University of Moldova, 2025)

  The growing interest in functional food ingredients and sustainable bioresources has increased the scientific focus on microbial β-glucans. These polysaccharides are recognized for their immunomodulatory, antioxidant, and ...
• Reduction of sodium content in baking through new technological approaches 

  CARACACI, Corina; CODINĂ, Georgiana Gabriela; GHENDOV-MOSANU, Aliona (Technical University of Moldova, 2025)

  Excessive sodium consumption is a global public health concern, negatively impacting life expectancy and overall quality of life. Bread, one of the world’s staple foods, contributes significantly to total sodium consumption, ...
• The digital tool for managing the document submission and receiving process of the State Tax Service 

  BURLACU, Natalia; BOLOCAN, Alexandru-Laurențiu (Technical University of Moldova, 2025)

  Digitization has become essential in modern society, transforming the way we live, work, and interact. The state institutions, including those in the Republic of Moldova, are no exception to this process, being faced with ...
• Evaluation of cybersecurity training perceptions, adopted practices and strategic directions for capacity building 

  PECA, Ludmila; COJOCARU, Svetlana; DUMITRAŞCU, Marius; ŢURCANU, Dinu (Technical University of Moldova, 2025)

  This paper presents the results of a study conducted by the National Institute of Innovations in Cybersecurity CYBERCOR on the impact of specialized cybersecurity training on behaviors related to the protection of personal ...
• Analysis of cloud biomedical healthcare systems security based on matrix Rewriting SRNS with Fuzzy Parameters 

  MОRАRU, Viсtоr; SCLIFOS, Alexei; CUZMIN, Simion; GUȚULEAC, Emilian (Technical University of Moldova, 2025)

  This paper presents an analytical uncertainty performability, (especially the security) analysis of Cloud Biomedical Healthcare Systems (CBHS) Security based on Matrix Rewriting Stochastic Reward Nets with Fuzzy parameters ...
• Ni-doped CuO sensors with controlled selectivity at high operating temperatures for hydrogen detection 

  LITRA, Dinu; CHIRIAC, Maxim; ABABII, Nicolai; ZIMOCH, Lukas; TROFIM, Viorel; METLINSCHI, Pavel; DARII, Elena; LUPAN, Oleg (Technical University of Moldova, 2025)

  Gas sensors are of major importance in today's industrial, chemical, agricultural, energy and household fields, and their development for general consumer use is an area of growing interest. This study explores the development ...
• Control-relevant identification of the first-order inertial systems with time-delay 

  COJUHARI, Irina (Technical University of Moldova, 2025)

  This paper presents an approach for control-relevant identification of inertial systems with time delay. The experimental identification was conducted in closed-loop, and the control object is approximated by a first-order ...
• Fake news detection in Moldova’s information space 

  SMARCEVSCAIA, Maria; BOBICEV, Victoria (Technical University of Moldova, 2025)

  This work is devoted to the development of a system for automatic detection of fake news in Russian, relevant for the region of the Republic of Moldova and its neighboring countries. Initially, a representative dataset of ...
• Tuning the controller for object models with one to four poles using the polinomial method 

  IZVOREANU, Bartolomeu; MORARU, Dumitru; FIODOROV, Ion; COJUHARI, Irina; SECRIERU, Adrian; NAMOLOVAN, Iulia (Technical University of Moldova, 2025)

  The paper describes the procedure for tuning the controller for control object models with one to four poles using the polynomial method, by imposing the damping ratio and the settling time of the synthesized system. The ...
• Vibration analysis of mechanical systems with multiple degrees of freedom using Python 

  MALCOCI, Iulian (Technical University of Moldova, 2025)

  This study investigates the dynamic behavior of a discrete multi-mass structure, which is highly relevant for engineers seeking to predict and control structural oscillations. The research starts from the hypothesis that ...
• Fatty acid methyl esters GC/FID analysis using Ichihara-Fukubayashi modyfied method 

  BAERLE, Alexei; GUREV, Angela; DRAGANCEA, Veronica; SUBOTIN, Iurie; DRUTA, Raisa (Technical University of Moldova, 2025)

  The method for preparing fatty acid methyl esters (FAMEs) from lipids for gas-liquid chromatography, developed by K. Ichihara and Y. Fukubayashi, was optimized as a result of research on the influence of mild (45 ℃, for ...
• Molecular diagnostics of soil-borne pathogenic fungi in several agricultural crops 

  DEAGHILEVA, Angela (Technical University of Moldova, 2025)

  Cerințele contemporane pentru asigurarea unei calități înalte a produselor agricole impun o extindere a competențelor în domeniul producției și gestionării acestora, prin investigarea relațiilor cauză-efect ce determină ...
• Advanced drone-based monitoring of agricultural, forestry, and aquatic ecosystems: technical framework 

  GUTU, Maria; ROTARU, Lilia; ALEXEI, Victoria; KAPUSTEANSKI, Maxim (Technical University of Moldova, 2025)

  The rapid advancement of drone technology has significantly transformed environmental monitoring, enhancing capabilities for observing and managing agricultural, forestry, and aquatic ecosystems. This paper presents a ...
• The effect of torrefaction on pellets made from vegetal biomass generated by fruit shrubs 

  MARIAN, Grigore; BANARI, Alexandru; MARIAN, Teodor (Technical University of Moldova, 2025)

  This study investigates the effects of torrefaction on the properties of pellets produced from vegetable biomass residues of fruit shrubs. The research focuses on two pellet formulations: (1) a blend of sea buckthorn ...
• Cyber security professional development within CYBERCOR 

  ȚURCANU, Dinu; PECA, Ludmila; PRISACARU, Adrian; ȚURCANU, Tatiana (Technical University of Moldova, 2025)

  One of the main development challenges facing the Republic of Moldova is its vulnerability to state security threats and risks. In the context of the objectives for developing the digital economy and digitalizing public ...
• Securing Moldovan small and medium-sized businesses: strategies based on it infrastructure domains 

  ALEXEI, Anatol; MORARU, Victor; ALEXEI, Arina (Technical University of Moldova, 2025)

  The digitization of small and medium-sized enterprises (SMEs) has accelerated in recent years, increasing their reliance on information systems to support core business operations. ENISA’s 2021 report showed an important ...
• Quantum computing for multi-qubit systems using Schwinger representation of angular momentum 

  GERU, Ion (Technical University of Moldova, 2025)

  This paper deals with the features of quantum computing for a system containing a relatively large number of qubits n, which is characterized by a half-integer effective spin S in the Schwinger representation of paired ...
• Ensuring effective management of medical devices through safe use of medical devices and evidence-based management 

  GORCEAG, Gheorghe (Technical University of Moldova, 2025)

  To ensure effective management of medical devices, it is imperative that medical devices must be safe and inoffensive, and their management must be based on evidence. Thus, to help enhance the safety of medical devices, a ...
• Interface adaptation design for extracellular recordings from excitable tissue 

  OANCEA, Constantin-Daniel (Technical University of Moldova, 2025)

  țesut, înregistrare, condiționare, amplificator instrumentațional For a clear and almost exhaustive perspective on the physiology of living organisms, it is important to use the best method to sample the signal and to ...

View more