Proiectul de gazificare a satului Tabani, raionul Briceni reprezintă un pas important în procesul de modernizare a infrastructurii energetice a regiunii, continuând cu o dezvoltare a rețelelor de distribuție a gazelor naturale în ultimii 20 de ani. Pentru a asigura o funcționare optimă a sistemului, au fost efectuate analize detaliate ale compoziției gazului care va alimenta satul, cu respectarea standardelor de calitate impuse de legislație și reglementări tehnice în vigoare din
Republica Moldova. Satul Tabani, cu o populație de 1812 locuitori, este alimentat cu gaze de la o stație de reglare cu presiunea de ieșire de 0,4 MPa. Rețeaua de distribuție este proiectată pentru o presiune medie și joasă, fiind alcătuită din conducte din polietilenă PE80 SDR11, pozate subteran, la o adâncime minimă de 0,8 m, cu protecție mecanică și avertizare vizuală. Consumul total de gaze al localității a fost determinat ca fiind de 2407,18 m³/h. Pentru sectorul casnic, s-a calculat un consum orar de 1326,81 m³/h. De asemenea, au fost efectuate calcule detaliate pentru instituțiile publice: grădiniță, liceu, primărie, biserică, centrul cultural, obținându-se consumuri orare și anuale specifice, în funcție de numărul de utilizatori și regimul de funcționare. Spre exemplu, instituția preșcolară are un consum
anual estimat la 12882,12 m³, iar liceul teoretic – 94752,16 m³/an. Pentru uzina de producere a asfaltului au fost proiecate două arzătoare de gaze, unul de tip FBR GAS XP 60/2CE EVO, fiind cu 2 trepte de operare având o putere nominală de la 232 kW la 630 kW, cu un debit maximal de gaze
naturale de 474 m3/h. Al doilea de tip FBR GAS P 450/MCE-EL (BT320)(VC)(TL) cu 2 trepte, cu puterea nominală de la 580 kW până la 5220 kW cu un debit maximal de gaze naturale de 526 m3/h rezultând un consum orar total de 1000 m³/h. Ulterior, s-au dimensionat conductele și s-au ales regulatoarele de presiune tip ERG-SE-10, ERG-SR-100, ERG-SE-25, РДГ-80Н, РДК-50/20Н, în funcție de debit și presiune. În cadrul lucrării au fost realizate calcule hidraulice pentru rețelele de presiune medie și joasă, dimensionarea instalației interioare de gaze pentru o casă individuală, precum și scheme de automatizare a reglării presiunii. De asemenea, au fost incluse măsuri de securitate a activității vitale și de protecție a mediului. Pentru organizarea execuției lucrărilor de construcție-montaj a branșamentului de conductă PRG-U-15-14 cu o lungime totală de 1108 m. A fost elaborate tehnologia montării, graficul de execuție și salarizare a lucrătorilor. Lucrarea are un caracter aplicativ pronunțat, întrunind toate elementele unui proiect real de execuție. Proiectul este fezabil din punct de vedere tehnic, economic și ecologic și oferă soluții moderne și sigure pentru alimentarea cu gaze naturale a localități rurale.
The gasification project of Tabani village, located in the Briceni district, represents an important step in the modernization of the region's energy infrastructure, continuing the development of natural gas distribution networks over the past 20 years. In order to ensure optimal operation of the system, detailed analyses of the gas composition intended to supply the village were conducted, in compliance with the quality standards imposed by current legislation and technical regulations in the Republic of Moldova. Tabani village, with a population of 1,812 inhabitants, is supplied with natural gas from a regulation station with an outlet pressure of 0.4 MPa. The distribution network is designed for medium and low pressure, and is composed of underground polyethylene pipes (PE80 SDR11), installed at a minimum depth of 0.8 meters, with mechanical protection and visual warning systems. The total gas consumption of the locality has been determined to be 2,407.18 m³/h, with the domestic sector accounting for an hourly consumption of 1,326.81 m³/h. Detailed consumption calculations were also carried out for public institutions such as the kindergarten, high school, town hall, church, and cultural center, with specific hourly and annual consumption figures estimated based on the number of users and their operating schedules. For example, the preschool institution has an estimated annual consumption of 12,882.12 m³, while the theoretical high school is expected to consume 94,752.16 m³/year. For the asphalt production plant, two gas burners were designed: one of type FBR GAS XP 60/2CE EVO, featuring two-stage operation with a nominal power ranging from 232 kW to 630 kW, and a maximum natural gas flow rate of 474 m³/h. The second burner, of type FBR GAS P 450/MCE-EL (BT320)(VC)(TL), also with two stages, operates with a nominal power range from 580 kW to 5,220 kW and a maximum gas flow rate of 526 m³/h, resulting in a total hourly consumption of 1,000 m³/h. Subsequently, the gas pipelines were dimensioned, and pressure regulators of types ERG-SE-10, ERG-SR-100, ERG-SE-25, РДГ-80Н, and РДК-50/20Н were selected, based on flow rate and pressure requirements. The project includes hydraulic calculations for medium- and low-pressure networks, as well as the design of an internal gas installation for a single-family home, and automation schemes for pressure regulation. Moreover, it outlines safety measures and environmental protection strategies. For the construction and installation work related to the PRG-U-15-14 pipeline branch with a total length of 1,108 meters, the technology for installation, execution schedule, and worker wage plans were developed. The project has a distinctly applied character, incorporating all the elements of a real-world execution plan. It is technically, economically, and environmentally feasible, providing modern and safe solutions for the natural gas supply of a rural locality.