Facultatea Calculatoare, Informatică şi Microelectronică: Recent submissions

  • Influence of Face Mask on Breathing During Hyperventilation Test 
    BESLEAGA, Tudor; CALABRESE, Pascale; VOVC, Victor; BACONNIER, Pierre; MOLDOVANU, Ion; EBERHARD, Andre (Technical University of Moldova, 2011)
    The aim of present study was to evaluate the changes of breathing pattern related to the influence of the face mask during voluntary hyperventilation. We compared respiratory variables in recordings with and without mask ...
  • Sensors of Ultraviolet Radiation for Medical Equipment 
    ABABII, I.; ARAMA, E. (Technical University of Moldova, 2011)
    The results of elaboration, construction and implementation of ultraviolet radiation detector with high sensibility are presented, which is used as portable device for measuring the intensity and dose. Photodetectors possess ...
  • The Change of Peripheral Excitability Caused by Millimeter Waves 
    SAULEA, Aurel; CHIHAI, Victoria (Technical University of Moldova, 2011)
    We conducted a double blinded prospective trial to evaluate the change peripheral excitability effect of millimeter waves (MW) under experimental conditions. Sixty healthy volunteers were exposed to active medical MW ...
  • Polymer-based materials with biocide activity for biomedical applications 
    ZANOAGA, Madalina; TANASA, Fulga (Tehnica UTM, 2013)
    Polymer and material science has had a major impact on our day-to-day life. Telecommunications, automotive and aero-space industry, medicine and health care, agriculture and leisure are just a few domains significantly ...
  • Implant-bone boundary, management with coordinative of zinc and vanadium compounds 
    GRANCIUC, Victoria; MĂNĂSCURTĂ, Ghenadie; GRANCIUC, Gheorge (Tehnica UTM, 2013)
    Theoretical concept about description of the implant integration into the bone on a microscopic view remains to be a wide studied subject. The study of the morphological samples with sections on the border implant-bone had ...
  • Biological properties of nanoiron 
    SCUTARI, Corina; GONCIAR, Veaceslav; CEKMAN, Ivan; CERLAT, Sergiu (Tehnica UTM, 2013)
    Iron oxide nanoparticles have been widely used experimentally for numerous applications such as magnetic resonance imaging contrast enhancement, tissue repair, immunoassay, detoxification of biological fluids, hyperthermia, ...
  • Synthesis and characterization of copolymers based on styrene-butadiene grafted with antimicrobial agents 
    ROBU, S.; FILIP, V.; PRISACARI, V.; DIZDARI, A.; GHEOACA, P.; SPURCACI, B.; CULEAC, I. (Tehnica UTM, 2013)
    The paper describes polymer materials based on styrene–butadiene grafted with antimicrobial components. The engraftment of copolymer styrene: butadiene-1,2 with methacrylic acid has been performed. The structure of grafted ...
  • Functionalized fluorescent nanoparticles for cell labeling for further sensor diagnostics 
    YASHIN, K.D.; DICK, S.K.; ZHAVNERKO, G.K.; OSIPOVICH, V.S.; TERPINSKAYA, T.I.; BARUN, V. V.; KVASYUK, A. A.; PETROVA, E. A. (Tehnica UTM, 2013)
    Core size of the core and the nature of semiconductor CdSe/ZnS nanoparticles (NP’s) were the subject of the research to understand main reasons of the dynamics of “living cell/nanoparticle” interactions. Core size of NP ...
  • Study of the titanium alloys surfaces used in orthopaedic systems 
    BADITA, Liliana-Laura; GHEORGHE, Gheorghe (Tehnica UTM, 2013)
    Total hip prosthesis (THP) is a highly successful orthopaedic device. However, its durability is generally limited to a few decades due to difficult conditions in the human body and huge demands it is subjected to. A hip ...
  • Polymeric nanoparticles as carriers for stimuliresponsive drug delivery systems 
    TANASA, Fulga; ZANOAGA, Madalina (Tehnica UTM, 2013)
    Targeted drug delivery systems has emerged from the necessity to overcome the flaws of conventional therapeutics, such as poor targeting, lack of specificity, short circulation time, etc. Drug delivery systems are required ...
  • Synthetic substances - antibacterial and antifungal potential products 
    PRISACARI, Viorel (Tehnica UTM, 2013)
    The paper presents the research results of a series of synthetic substances that have pronounced antibacterial and antifungal properties and can serve as a basis for obtaining and producing of new antibacterial and antifungal ...
  • Rare earth activated phosphors for different applications 
    NAZAROV, Mihail (Tehnica UTM, 2013)
    For the purpose of development of highly energy-efficient light sources, one needs to design highly efficient green, red and yellow phosphors, which are able to absorb excitation energy and generate emissions. Using double ...
  • Anomalous electron transport with “giant current density” at room temperature observed with nanogranular materials 
    KOOPS, Hans W. P. (Tehnica UTM, 2013)
    Focused electron beam induced deposition is a novel bottom up nano-structurization technology. An electron beam of high power density is used to generate nano- structures with dimensions > 20 nm, but being composed from ...
  • Nanodimensional AlN layers grown on silicon in the system H2-HCl-Al-NH3 
    RAEVSCHI, Simion; BOTNARIUC, Vasile; GORCEAC, Leonid; TIRON, Stefan; KOMPAN, Mihail; ZHILYAEV, Yurii (Tehnica UTM, 2013)
    There were obtained nanodimensional AlN layers on Si by HVPE (Hydride Vapor Phase Epitaxy) method. SEM (Scanning Electron Microscopy) images of AlN layers, and cross-sections of AlN/Si structures are shown. The structure ...
  • Topological interface states and effects for next generation of innovative devices 
    KANTSER, Valeriu; CĂRLIG, Sergiu (Tehnica UTM, 2013)
    Topological insulators (TI) have opened a gateway to search new quantum electronic phase of the condensed matter as well as to pave new platform of modern technology. This stems mainly on their unique surface states that ...
  • Nanowires for biomolecule detection 
    LINNROS, Jan (Tehnica UTM, 2013)
    There is an increasing demand for portable sensor systems in health care that enable on-site analyses e.g. at local medicare centers, in ambulances or even at home. Semiconductor nanowires offer a highly sensitive and label ...
  • Effects of the annealing and exposure on the optical and photoinduced properties of amorphous (As4S3Se3)1-x:Snx thin films 
    IASENIUC, O. V. (Tehnica UTM, 2013)
    The influence of the heart treatment and light exposure on optical and photoinduced properties of (As4S3Se3)1-x:Snx thin films are investigated. The thin films were characterized by X-Ray diffraction (XRD), and optical ...
  • Role of the dissipative organic matrix in the two-electron transfer in the dimer nanocluster 
    YALTYCHENKO, O. V.; KANAROVSKII, E. Yu. (Tehnica UTM, 2013)
    The influence of dissipative environment, such as a weak structured organic matrix, on the electron transfer kinetics in the dimer nanocluster with two electrons is theoretically investigated. The theoretical model within ...
  • Preparation and characterization of GaP colloidal nanoparticles and films 
    PYSHKIN, S.; RUSU, E.; IACOB, M.; URSAKI, V.; GUTSUL, T.; BALLATO, J. (Tehnica UTM, 2013)
    In this communication, we present results of investigations of the influence of technological conditions upon the properties of GaP nanoparticles produced by using a new precursor as a source of Ga atoms. The obtained ...
  • Electrophysical properties of nanometric CdS layers deposited by pulverization method 
    BANU, S.; BOTNARIUC, V.; GORCEAC, L.; COVAL, A.; CINIC, B.; CHETRUŞ, P.; RAEVSCHI, S. (Tehnica UTM, 2013)
    The objective of this paper is establishing of the optimum conditions for CdS layers deposition by pulverization method on glass substrates coated with a previously deposited tampon SnO2 layer, studies of their electrical ...

Search DSpace


Advanced Search

Browse

My Account